Valentine Glass Tile
Supplies:
30143328 RIBBON ROSE RED .375IN 72PC
30120831 TILES OVAL GLASS 10PCS
30125315 TILES-HRT GLS 25X25MM 16PC
30141422 ALCOHOL INK .5OZ ET RED PEPPER
30144669 MINI HEART SILVER
30090978 QK LNK-HEART 20X22.5MM DC SP
30114988 BAIL-SM SILVER PLATED 10PK
30112542 GLTTR JEWEL RED UF
30144675 UV CRYSTAL SUPER
30144458 LAMP UV 9 WATT
CARDSTOCK SCRAP
TOOTH PICK OR OPEN UP A PAPER CLIP (USED TO MOVE RESIN)
CLEAR PACKING TAPE
Instructions:
Oval Tile With Rose:
Take the cardstock scrap and cut down a piece about the size of a standard business card, doesn’t need to be perfect.
Place the clear packing tape on the card so that the sticky side is up.
Place the heart link on the tape, put a nickel size amount of resin in the middle of the heart.
Use the tooth pick or open paper clip to move the resin around to coat the interior of the heart. Make sure you reach all edges.
Sprinkle red glitter on the resin and then place the small silver hearts on top.
Place the card into the UV lamp for 3 minutes.
Remove the card from the lamp and peel the heart off the tape.
Add a small amount of resin to the back of the heart and place onto an oval tile with the point of the heart turned to the side.
Place this into the UV lamp for 3 minutes.
Repeat the last steps to attach the rose and the bail.
Within My Heart:
Paint the back of the heart tile with alcohol ink and let dry.
Take the cardstock scrap and cut down a piece about the size of a standard business card, doesn’t need to be perfect.
Place the clear packing tape on the card so that the sticky side is up.
Place the painted heart tile onto the tape, painted side up. You might want to make small fillers out of the packing tape to tuck
under the edges of the heart tile in order to keep it level as you work.
Cover the back of the heart with a thin layer of resin. Place the bail on top and put it into the UV lamp for 3 minutes.
Remove from the lamp and turn the heart over.
Add about a pea size worth of resin onto the center of the heart and spread it out.
Lay a Quick Link Heart over the heart tile at an angle.
Sprinkle with glitter and place the small hearts within the link.
Place back into the UV lamp for 3 minutes.