Deep Sea Kisses

DOWNLOAD PDF INSTRUCTIONS HEREB0175_BSprjt

SUPPLIES 
Chain
Fire polish strand of choice
Strand of coral pieces
22g wire
26g wire
Jump rings
Ear hooks

TOOLS 
Round nose plier
Flush Cutter
Flat nose plier

INSTRUCTIONS
1. Cut chain into 2–1 inch pieces.

2. Connect to a jump ring an ear hook and the 2 pieces of chain.

3. Take a piece of 22g wire (about 3 inches), using the wire wrap method, attach one end of the wire to the last link of one of the chains. Trim off the excess wire from the wrap.

4. String 4 fire polish beads onto wire.

5. Again using the wire wrap method, wire wrap the end of wire to the last link of the other chain. Trim off the excess wire from the wrap. This will be referred to as the “fire polish link” in the rest of the instructions.

6. Take a piece of 26g wire (about 4 inches), and wire wrap one end to the loop of the fire polish link. Trim off the excess wire from the wrap.

7. String coral pieces onto wire until you have a length slightly longer then the length of the fire polish link. Wire wrap the end to the other loop of the fire polish link. Trim off the excess wire from the wrap.

8. Repeat all steps for the other end of the earring. Wear them and enjoy!

Comments are closed.